LR2K0308 overload relay 3P 1.8-2.6A

LR2K0308 overload relay 3P 1.8-2.6A
Price: $36.12 ×
= 36.12
Manufacturer: Schneider Electric
Model: 004.014.208
Weight: 157 g
In supplier's stock, Delivery time: 08/08/2018
LR2K0308 overload relays are designed for the protection of motors. They are compensated and phase failure sensitive. Resetting can either be manual or automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only.
Separate mounting: using terminal block LA7K0064.
On the front face of the overload relay:
  • selection of reset mode: Manual (marked H) or Automatic (marked A),
  • red pushbutton: Trip Test function,
  • blue pushbutton: Stop and manual Reset,
  • yellow trip flag indicator: overload relay tripped.
Main
rangeTeSys
product nameTeSys LRK
product or component typeDifferential thermal overload relay
device short nameLR2K
relay applicationMotor protection
product compatibilityLC1K
LP1K
LC7K
LP4K
network typeAC
DC
thermal overload classClass 10A conforming to IEC 60947-4-1
thermal protection adjustment range1.8...2.6 A
[Ui] rated insulation voltage600 V power circuit conforming to CSA C22.2 No 14
690 V power circuit conforming to BS 4941
690 V power circuit conforming to IEC 60947
750 V power circuit conforming to VDE 0110 group C
Complementary
network frequency<= 400 Hz
mounting supportPlate with specific accessories
Rail with specific accessories
Under contactor
auxiliary contact composition1 NO + 1 NC
[Ith] conventional free air thermal current6 A for signalling circuit
[Ue] rated operational voltage<= 690 V for power circuit
690 V AC AC-15 for signalling circuit
250 V DC DC-13 for signalling circuit
associated fuse rating6 A gG for signalling circuit conforming to VDE 0660
6 A gG for signalling circuit conforming to IEC 60947
[Uimp] rated impulse withstand voltage6 kV
power dissipation per pole2 W
phase failure sensitivityYes conforming to IEC 60947-4-1
local signallingTrip indicator (yellow)
control typeRed push-button trip test function
Blue push-button stop and manual reset
Selector switch manual or automatic for reset mode
connections - terminalsScrew clamp terminals 1 cable(s) 1.5...4 mm² - cable stiffness: solid
Screw clamp terminals 1 cable(s) 0.75...4 mm² - cable stiffness: flexible - without cable end
Screw clamp terminals 1 cable(s) 0.34...2.5 mm² - cable stiffness: flexible - with cable end
Screw clamp terminals 2 cable(s) 1.5...4 mm² - cable stiffness: solid
Screw clamp terminals 2 cable(s) 0.75...4 mm² - cable stiffness: flexible - without cable end
Screw clamp terminals 2 cable(s) 0.34...1.5 mm² - cable stiffness: flexible - with cable end
tightening torque1.3 N.m - on screw clamp terminals - with screwdriver Philips No 2
1.3 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
height58 mm
width45 mm
depth65 mm
product weight0.145 kg