Control relay CAD32JD

Control relay CAD32JD
Request the price
Manufacturer: Schneider Electric
Model: 004.017.111
Weight: 600 g
In supplier's stock
TeSys D Control relay CAD32JD is intended for 35 mm DIN rail installation. Can also be mounted on a panel by means of M4 screws.
3 normally open (3NO) and 2 normally closed (2NC) contacts.
Control circuit voltage 12V DC.
Screw clamp terminals. Connection of cables with cross-section 1...4 mm2 is allowed.
Conforms to the following standards: IEC60947-5-1, NF C 63-140, VDE 0660, BS 4794, EN60947-5.
Specification
Control circuit characteristics
Rated control circuit voltage (Uc)12V DC
Operational voltage limits0,8...1,1Uc at 50Hz
0,85...1,1Uc at 60Hz
Drop-out voltage limits0,3...0,6Uc
Inrush power70VA (at Uc 50Hz, 20°C)
Hold-in power consumption8VA (at Uc 50Hz, 20°C)
Operating timecoil energisation and NC contacts opening4...19ms
coil energisation and NO contacts closing12...22ms
coil de-energisation and NC contacts closing6...17ms
coil de-energisation and NO contacts opening4...12ms
Operating rate3 cycles/s
Mechanical durability30×106 cycles
Characteristics of instantaneous contacts
Contacts configuration3NO+2NC
Rated operational voltage (Ue)≤690V 25...400Hz
Rated insulation voltage (Ui)conforming to IEC 60947-5-1690V
conforming to UL, CSA600V
Conventional free air thermal current (at ≤60°C)10A
Minimum switching voltage17V
Minimum switching current5mA
Associated fuse rating (conforming to IEC 60947-5-1)10A gG
Rated making capacity (Irms)140A AC
250A DC
Rated short-time withstand current (Icw)100A 1s
120A 500ms
140A 100ms
Insulation resistance>10MOhm
Connection
Terminal typescrew clamp terminals
Cable cross-sectionsolid, without cable end1×1...4mm2, 2×1...4mm2
flexible, without cable end1×1...4mm2, 2×1...4mm2
flexible, with cable end1×1...4mm2, 2×1...2,5mm2
Tightening torque1,2 N·m
Environmental characteristics
Operating temperature-40°C ... +70°C
Storage temperature-60°C ... +80°C
Protective treatment conforming to IEC 60068TH
Degree of protection conforming to VDE 0106IP2X
Standard control circuit voltages
AC supply
Voltage, V244248110115220230240380400415440
50/60HzB7D7E7F7FE7M7P7U7Q7V7N7R7
DC supply (coils with integral suppression device fitted as standard)
Voltage, V122436486072110125220250440
U 0,7…1,25 UcJDBDCDEDNDSDFDGDMDUDRD
Low consumption (coils with integral suppression device fitted as standard)
Voltage, V512202448110220250
U 0,7...1,25 UcALJLZLBLELFLMLUL
Dimensions and scheme
Relay dimensions and scheme